在肇庆酒店晚上怎么叫服务

 Focus on_ PC sunshine board, endurance board, PC board carving Blister processing, Star Room - custom production [poly Bayer]
2018-09-08 18:10:15

Selection of canopy thickness of sunlight board endurance board

Share with:

What is the most suitable thickness of canopy for the entrance and exit of the garage? It has the characteristics of anti-corrosion, anti-corrosion, anti-corrosion, anti-corrosion, anti-corrosion, anti-corrosion, anti-corrosion, anti-corrosion, anti-corrosion, anti-corrosion, anti-corrosion, anti-corrosion, anti-corrosion, anti-corrosion, anti-corrosion, anti-corrosion, anti-corrosion, anti-corrosion, anti-corrosion, anti-corrosion, anti-corrosion, anti-.


The design service life of the sunlight board daylight roof is more than 10 years, and it can resist the typhoon attack of more than 13 levels. However, the sunlight plate has so many advantages, but it has a fatal weakness. The price is relatively expensive. The thicker the sunlight plate, the more expensive the price is. How thick the sun board is suitable for the entrance and exit of the parking garage and the awning shed. The customer has a blind heart when choosing the plate. They think that the thicker is the better, but it is not.

 PC sun board

In 2012, the shed of a clothing factory in Jiaxing, Zhejiang Province, used 8.0 mm thick Meikai sunshine board. There is a coextrusion layer on the surface of the plate, and the UV coating will not yellowing, atomization and poor light transmission when exposed to sunlight, which can prevent the sunlight plate from yellowing caused by ultraviolet rays.

How to measure the thickness of the endurance board?


  1. First measure the length, width and thickness of PC endurance board with tape measure and record them respectively
  2. Weigh the weight of this endurance board with a scale
  3. According to the calculation method of the weight of the endurance plate: weight = length * width * thickness * 1.2, reverse push thickness = mass + length + width + 1.2
  4. For example: if the weight of the endurance board is 1.2kg, and the length and width are 1 m respectively, then the thickness of the endurance board is 1.2 (mass) × 1 (length) / (1.2 = 1 mm), then the thickness of the board is 1 mm

      Sunshine board endurance board consultation: 17701829098, Manager Wang


Last article: Meikai plastic analysis sunshine panel Market
Next: What is a sunshine board?